Flat Sheet Specifications
FS - Flat Sheet Specifications Gold supplied in sheets up to 6 inches wide. Sheets are mill finish. Minimum gold order: 1 x 1/2 inch or 25 x 13MM, maximum gold order is 6 x 36 inch or 152 x 914mm. Sterling silver and TruSilver® sheets supplied in even gauges only up to 6 x 36 inch. Odd gauges available with longer lead times. One dimension must be either 3, 6 or 12 inches. If not, scrapping fee applies. Sterling silver also available in 12 inches wide by 36 inches in gauges 16, 18, 20 and 22. All sheets are shear cut.
For all gold, platinum and palladium products, all sizes between 8 and 30 gauge are stock items. If not ordering sheet in a standard gauge, please order thickness dimension in thousandths of an inch. Charge for multiple cuts of 10 or more of silver sheet is $.45/piece.
Flat Sheet Temper
Soft temper gold sheet is annealed after the final thickness is reached, making it dead soft. We will provide this temper upon request. Hard temper gold sheet is annealed approximately 0.004" - 0.015" before the final thickness is reached. We stock sterling silver sheet in our standard temper and will provide hard temper sheet for an additional $10.50, upon request. |
Stock Metals Next day shipping if regular temperfor up to 10oz gold or 100oz silver and ordered before 5 pm Eastern time for: • 14K Yellow (14Y) • 14K White (14W) • 18K Royal Yellow (18R) • 18K Yellow (18Y) • Sterling Silver (STR) • TruSilver® (TS)
Made To Order Metals Three day shipping on these Made to Order metals. 400 dwt minimums on metals below: • 10K Pink (10P)
Any metals that require special |